Difference: WmsxReference (14 vs. 15)

WMSX

Basic usage

This is a program for mass job management on the Grid. There are two program you will be using: Provider and Requestor.

Provider

Provider is the background process which does the actual work. There can be only one provider running on a machine per user. Start with:

wmsx-provider.sh  myworkdir  [-v]

where:

myworkdir

Location of the working directory. This is where all the logging and output goes. You may want to set this to a location inside your home directory.

-v

Specifies that you want debug output on the console. Leave this out once you feel comfortable.

After the start of the provider, directories log, debug and out is prepared under the working directory. The logging informations of the WMSX actions are written into a file under the log directory. The files jobids.all, jobids.running, jobids.failed and jobids.done under the working directory contain the unique job identifiers of the sent Grid jobs.

Note: On certain platforms, the file and directory names, given as command line arguments to wmsx-provider.sh or wmsx-requestor.sh, are only properly recognized when specified as absolute paths.

Requestor

Requestor is an application to submit commands to the Provider system for execution. Start with:

wmsx-requestor.sh  -option

A complete list of options is available with -h. Some options are:

-f

Check if the provider is running.

-k

Kill provider.

-backend yourbackend

With this, you may specify the job submission backend. Here, yourbackend may be any of glitewms, edg, worker, or local, fake, gat. Default backend is glitewms. The backend is the system which is actually taking care about your job submission. The backend concept shall be explained later.

-rememberafs

Will ask for your AFS password and renew AFS tokens until provider is running. It only works if you do not quit the interactive terminal (when you quit interactive session, AFS automatically deletes your tokens).

-forgetafs

Forget the AFS password.

-vo yourvo

Set the VO for all future job submissions to yourvo.

Submission of single jobs with traditional JDL files

Single jobs may be submitted and managed via the framework, by using traditional JDL files. A sample usage is:

wmsx-requestor.sh  -j example.jdl  -r resultDir  [-o StdOutFile]

Where the options are:

-j

Name of the JDL file.

-r

When the job is done, results are retrieved and stored in the given directory.

-o

If the JDL file has JobType set to "Interactive", then StdOut / StdError will be retrieved while the Job is running and stored in the given filename.

Automated mass submission of jobs via ArgList files

By using ArgList files, one can submit many independent jobs and handle their outputs in a simple and efficient way.

The ArgList file can contain lines of the following format:

COMMAND parameters

where COMMAND refers to a job name, and parameters are the command line arguments of the executable of your job.

To submit the jobs, use:

-a args.file

Submit many jobs with the ArgList file, named args.file.

-name runname

Give the name runname to this execution run (optional). It is used as a subdirectory under the working directory of the provider to distinguish between different ArgList submissions.

-n nmaxjobs

Set the maximal number of concurrently running jobs to nmaxjobs (optional).

The word COMMAND refers to a WMSX JDL file (not a traditional JDL file), named COMMAND.wjdl, which describes your job. If the COMMAND.wjdl is not present, default job specifications are assumed, which shall be discussed in the followings.

The outputs of the jobs are written into generated directories under the out directory of the specified working directory of the provider.

WMSX JDL files

For each COMMAND in the ArgList file, there may be a WMSX JDL file COMMAND.wjdl, to customize the properties of your job. The structure of a WMSX JDL file is similar to traditional JDL files, however the supported variables are only:

JobType

If this variable is set to "Interactive", the jobs will be run as interactively in the sense that the StdOut / StdError is retrieved on-the-fly, so you are able to see what your job is currently doing. If not set, the job is not interactive by default.

Archive

Name of the program archive file. This is the name of the tarball, containing your program. If not specified, defaults to "COMMAND.tar.gz". (Must be of tar-gz format!)

ProgramDir

Name of the root directory inside the program archive file. The files and directories of your program archive are assumed to be under this directory, and their paths are assumed to be given relative to this directory. Setting this to "." means that the content of your tarball is not wrapped in a directory. If not specified, defaults to "COMMAND".

Executable

Name of the executable to run inside the ProgramDir. If not specified, defaults to "COMMAND".

OutputDirectory

The name of the directory under ProgramDir, where the output of your program is written. This is the directory, which is going to be retrieved by the framework as output. If not specified, defaults to "out".

Software

List of software that must be present (executable) on the target machine. The special key "AFS" requires and checks AFS presence. E.g.: Software = {"AFS", "g++"};. If not set, defaults to empty.

Requirements

Extra queue requirements, like in a traditional JDL file. If not set, defaults to empty.

If the WMSX JDL file is not present, the above default values are assumed (i.e. the tarball has to have the name COMMAND.tar.gz etc.).

In the followings, things are more easily explained if the notion of AbsCOMMAND is introduced: this is simply the full path to the file COMMAND.wjdl file (or if not present, to the the COMMAND.tar.gz file), without the ".wjdl" extension (or without the ".tar.gz" extension).

Pre-execution and post-execution scripts

In most times it is useful to have pre-execution and post-execution scripts. These may be used for e.g. preparing the input data files, or archiving output data files etc. If present, these have to be called COMMAND_preexec and COMMAND_postexec. They must be executable. They will be run directly before submission and after job output is retrieved, respectively.

COMMAND_preexec, if present, is automatically called by the framework with the AbsCOMMAND as first argument, the name of the job output directory as second argument (automatically generated by the framework), and with all the given arguments from ArgList as following arguments.

COMMAND_postexec, if present, is automatically called by the framework with the AbsCOMMAND as first argument, the name of the job output directory as second argument (automatically generated by the framework), and with all the given arguments from ArgList as following arguments.

The retrieved outputs of your job will always be in the tarball out.tar.gz under the generated job output directory.

If COMMAND_preexec returns with 0 nothing further happens: the Grid job is submitted. If returns with 1, the actual Grid job shall not be launched. This feature can be used for a job submission decision.

If COMMAND_postexec returns with 0 nothing further happens. If returns with 1, the script COMMAND_chain is called, if present, which can be used to launch further jobs.

Job chaining

The running time of Grid jobs is limited. This is unavoidable for efficient controling of resources. The time limit depends on the given queue, but a typical value is three days. However, one often faces such computing problems, when the total running time of the jobs cannot be estimated a priori, or it is estimated to be very long. For such cases, the job chaining is the solution: the program has to be split up into shorter subsequent pieces with limited running time. The program has to be written in such a way, that its running time is limited internally (e.g. to one day), and when this time limit is exceeded, its last state is dumped as output. The next copy of the program has to be started with this last state as input, thus, by such chain of limited lifetime jobs, one can imitate arbitrary long lifetime jobs. The script COMMAND_chain is the tool to lauch further jobs, when needed.

If the COMMAND_postexec script returns 1, the script COMMAND_chain is invoked (must be executable). In this case, if present, it is automatically called by the framework with the AbsCOMMAND as first argument, the name of the job output directory as second argument, and with all the given arguments from ArgList as following arguments.

The output of COMMAND_chain is interpreted by the framework as ArgList lines, just as if they were lines from the initial ArgList file. Therefore, it can be used to lauch further jobs by a finished job, depending on the decision of the COMMAND_postexec script. This is called the job chaining. (The COMMAND_chain may have multiple lines as output. Each line is interpreted like a line from the ArgList file, so multiple jobs may also be lauched: the job chain may also fork.) \ No newline at end of file